Thanks for visiting EJ Metals. We are proud to have recently been acquired by Skeeter Brush Trucks, an industry leader in wildland and other specialized apparatus! Please note that our site is currently undergoing revisions as a part of this new exciting change and some pages may reflect legacy products and designs. Our team continues to work diligently on bringing you updated information. If you have any questions, you can contact us directly at: 920-779-9913.
UHP Pump Systems
Wildland and Specialized Apparatus
Wildland and Specialized ApparatusE.J. Metals is the leading developer and manufacture of highly effective, ultra high pressure firefighting systems in the U.S. In fact, they’re pioneering the technology. We were the first to develop a hydraulically driven ultra high pressure fire fighting system that doesn’t require a gas-engine for power, and also provides a hydraulic tool circuit so you can power cutting tools or a chain saw. And, we are the only one to offer the patented Triplex™ triple-discharge nozzle specifically designed for ultra high pressure firefighting.
Ultra high pressure firefighting technology has been around for decades. In the late 1990s, scientists at Tyndal Air Force Base, Fla., advanced development of this technology to help build smaller, leaner fire trucks.
Today, E.J. Metals’ ultra high pressure firefighting technology offers a number of performance advantages:
- Incredibly effective — 15 minutes of firefighting time with just 70 gallons of water
- Uses up to two thirds less water and foam than traditional systems, thanks to the atomization of water that occurs at such ultra high pressures
- Light and compact — ideal for rough terrain vehicles, pickup trucks and full-size fire apparatus
- Minimizes water damage while delivering big knock-down capabilities
Applications: wildland / brush fires, first attack, interior fires, vehicles fires, laying break lines, liquid fires, structural fire.
New Deliveries Ultra High Pressure Fire Suppression
6 GPM @ 2,400 PSI Ultra High Pressure System for Exxon Mobil
6 GPM @ 2,400 PSI ultra high pressure pump system Honda IGX390 gasoline engine Operator control panel with LED light Foam proportioner, winterization port Retrofitted onto existing customer supplied water tank and UTV chassis Electric rewind hose reel with 150ft. of...
8 GPM Ultra High Pressure System for Oregon Fire Department
Slide-in unit mounting 8 GPM @ 2,800 PSI ultra high pressure pump Pressure protection, overheat protection Foam proportioner 20HP Honda GX630 gasoline engine Standalone engine staring battery 3G fuel tank Operator control panel 125G water/5G foam tank 1.00" tank to...
Fire & EMS UTV Unit for New London Fire Department
Customer supplied UTV chassis Custom-built aluminum pump platform, patient transport assembly 6 GPM @ 2,400 PSI ultra high pressure pump Honda IGX 390 gasoline engine Operator control panel with LED light 60G water/5G foam tank with water level indicator Electric...
Ultra High Pressure Pump Winterization Procedure
Decon Application
We are excited to introduce this new feature to our Ultra High Pressure Systems!!
Our 10 GPM UHP System, running at idle, will use 5.5 gallons of water per minute, and the decon agent will be metered at 1%. EJ Metals is a distributor for military and all government agency-approved Hygenall ToxOff decontamination agent. While the pump engine is running at idle, the water pressure is dropped to a safe level, so that an exposed hand can be held right up to the TriPlex UHP nozzle (spray pattern).
Now, not only can you fight fires, but afterwards, you can utilize the same system to safely and effectively decontaminate turnout gear, hoses, equipment and apparatus!
-
- Can be added to existing EJM UHP System
- 5 Gallon Jug of Decon Agent Provided
- Color Coded Tags for Easy Use
CAN BE ADDED TO GASOLINE, DIESEL and HYDRAULIC ULTRA HIGH PRESSURE UNITS
6 GPM @ 2,700 PSI ULTRA HIGH PRESSURE SYSTEM
PUMP SPECIFICATIONS
- Triplex plunger, ultra-high pressure, ceramic-lined pump
- Pressure Relief Valve
- Thermal Relief Valve
- Foam Proportioner
- Engine-Start Battery
- Kohler Command Pro Gasoline Engine
- 60 Gallon Water Tank with 5 Gallon Foam Cell
- 1.5” Tank Fill/Drain Valve
- Electric Rewind Hose Reel
- 150ft. of 3/8” Heavy Duty, High Pressure Hose
- Patented EJM Locking Tri-Plex water/foam nozzle
OPERATION PANEL
- On/Off Foam Valve- Reel Rewind
- Engine Start/UHP Pump Mode Valve
- Winterization Port
- System Discharge Pressure Gauge
- Water Strainer Cleanout
Small Package, Powerful Performance!
8 GPM ULTRA-HIGH PRESSURE REMOTE MOUNT – (PTO-Hydraulic Drive)
- 8 GPM @ 2800 PSI
- Die Cast Aluminum Crank Case
- Stainless Steel Valves & Seats
- Chrome-Moly Crank Shaft
- Oversized Bearings
- Brass In-Let Manifold
- Stainless Steel Discharge Manifold
- Specially Formulated High Pressure Seals
- Ceramic Lined Cylinders
- “A”, “B” & AFFF Compatible
- CAFS Quality Foam With Out
- The Maint. or Training
8 GPM HIGH PRESSURE UTILITY BODY MOUNT – ENGINE DRIVE
- 8 gallons per minute at 2,800 PSI
- Die cast aluminum crankcase
- Stainless steel valves and seats
- Chrome-moly crankshaft
- Oversized bearings
- Brass inlet manifold
- Stainless steel discharge manifold
- Specially formulated high pressure seals
PUMP ENGINE
- Engine Type: Air-cooled 4-stroke OHV
- Bore & Stroke: 78 x 72 mm
- Displacement: 688 cm3
- Net Power Output: 20.8 Horse Power @ 3600 RPM
10 GPM @ 1800 PSI ULTRA HIGH PRESSURE FIRE SUPPRESSION COMPACT SKID UNIT
- Gas, Diesel or Hydraulic Drive
- Electric or Manual Rewind Hose Reel
- Stand-Alone Pump Module or Skid Mounted
- Tank Sizes to Match Carrying Vehicle Payload
- Tank Configurations to Match Load Space
- UTV, Jeep, Truck, Trailer, Retrofit Installation
ULTRA-HIGH PRESSURE PUMP
EJM Triple Plunger High Pressure Pump with the following specifications.
- 10 gallons per minute at 1,800 PSI
- Die cast aluminum crankcase
- Stainless steel valves and seats
- Chrome-Moly crankshaft
- Oversized bearings
- High Strength Forged Brass manifolds
- Specially formulated high pressure seals
20 GPM @ 1500 PSI Ultra High Pressure Fire Suppression
20 GPM @ 1,500 PSI Ultra High Pressure
ULTRA-HIGH PRESSURE Fire Fighting Suppression System:
- Fire Fighting Suppression System:1.5” Direct Water Tank Fill/Drain Valve
- Tank to Pump Line
- Pressure Protection Valve System
- Honda Gasoline Engine
- 3G Fuel Tank
- Electric Rewind Hose Reel with 150-200ft of 1/2” High Pressure Hose
- UHP TriPlex Locking Nozzle with Three Spray Patterns
- Foam Proportioner
- Winterization Inlet
- EJM Tri-Plex Nozzle
CONTROL PANEL:
- Foam Proportioning ValveEngine Start / UHP Pump Mode
- System Pressure Guage
- Winterization Port
- Panel / Work Light Switch
- Foam / Flush Valve
- Reel Re-Wind Switch
OPTIONAL ADD ONS:
- Water Level GaugeFoam Level Gauge
- Winterization Inlet Port
- Pump Recirculation System
- LED Pump Lanel Strip Light
Engine:
Kubota liquid cooled diesel 24.6 H/P @ 3600 RPM 4-Cylinder, vertical in-line Direct fuel injection Full pressure lubrication HD dual element air cleaner Liquid cooled Electric start 18 Amp charging
VERSATILE OPTIONS FOR ULTRA HIGH PRESSURE
- HYDRAULIC PTO DRIVEN SYSTEM (FIRETRUCK)
- 20GPM GAS ENGINE DRIVEN SYSTEM (PICKUP TRUCK)
20GPM @ 1,500PSI Ultra High Pressure Water Pump
(Located in Fire Truck Compartments)
- PTO Hydraulic Pump Driven
- Foam Proportioner
- Two Electric Rewind Hose Reels with 200ft of 1/2” High Pressure Hose
- Hose Reel Shut Off Valves
- Two EJM Triplex Nozzles
- Control Panel
- Winterization Port
- Pump Connects to On-Board Water & Foam Tanks
20 GPM @ 1,500 PSI Ultra High Pressure Fire Fighting System
(System Fits Inside Pickup Truck)
- GX690 Honda Gasoline Engine
- 200 Gallon Water Tank
- 5 Gallon Foam Jug
- 3 Gallon Fuel Tank
- Fixed Shelf/Storage Tray
- Tilt Down Tray
- Control Panel with Water Level Gauge
- Work & Scene Lights
- Two Electric Rewind Hose Reels with 200ft of 1/2” High Pressure Hose
- Two EJM Triplex Nozzles
Power Box
High Pressure / High Volume / Hydraulic firefighting systems from EJ Metals, put unexpected knock down power in your hands
System Out-Put:
8 GPM @ 2800 PSI UHP water or water/foam solution discharge 150 GPM @ 80 PSI high volume flow water or water/foam discharge 1.5 GPM at pressures up to 10,500 PSI hydraulic fluid power for hydraulic rescue tool operation
Operation:
Three control switches on the operators panel one for each function. High pressure pump High volume pump Tool circuit. The three systems may be operated individually, or in simultaneous operation in all of the seven operations
Physical Attributes:
- All aluminum frame & enclosure
- Powder coated
- Stainless steel plumbing
- One piece operators panel
- Color coded labeling
- Easy installation in new vehicle
- 47.00″ Wide
- 30.00″ Tall
- Hydraulic Case Plugged Suction Drain Ports
- 44.00″ Deep
- 640 lbs. (approx.)
Some of EJ Metals ultra high pressure firefighting systems customers.
Altoona Fire Department (Hydraulic UHP Unit/Gull-Wing)
– Slide-In Unit Construction/One Piece Fire Suppression System
– 150G Water Tank
– 1.5” Water Tank Fill/Drain Valve
– (2) Aluminum “Gull-Wing” Compartments (72”W x 16”H x 18”D)
– Under Pump/Tank Storage Compartment
– (2) Poly Slide-out Tray
– Whelen Justice LED Lightbar
– 8 GPM @ 2,800 PSI Ultra High Pressure Pump
– Pump Powered by Chassis PTO w/45cc Rexroth Variable Hydraulic Pump System (Self-Contained)
– Operator Control Panel
– Adjustable Foam Proportioner
– Winterization Inlet Port
– Pump Tachometer Hour Meter
– Water Level Gauge
– 5G Foam Jug, Bracket with Hold-Down Straps
– Electric Rewind Hose Reel with 200’ of ¾” High Pressure Hose
– UHP TriPlex Locking Nozzle Gun Assembly
Rosenabuer South Dakota, LLC (20 GPM Hydraulic UHP System)
- 20 GPM @ 1,500 PSI Ultra High Pressure Pump
- 72cc Hydraulic Variable Displacement Pump
- Pump Primer
- Foam Proportioner
- 1.5” Tank to Pump Line
- Electric Rewind Hose Reel with 150’ of ½” High Pressure Hose
- UHP TriPlex Locking Nozzle Gun Assembly
- Control Panel with LED Lighting
- Winterization Inlet Port
(Water/Foam Tanks Provided by Customer)
(Chassis PTO provided by Customer)
Waterford Fire Department (UHP Hydraulic System)
– Retrofitted onto Pierce Engine
– 20 GPM @ 1,500 PSI
– 12V Pump Primer
Water Pump Driven by Hydraulic Pump Installed on PTO (Cheslea PTO, Rexroth Hydraulic Pump)
– Foam Proportioner
– Pressure & Overheat Protection
– (2) Electric Rewind Hose Reel with 200ft. of ½” High Pressure Hose Line
– (2) TriPlex Nozzles (Three Spray Patterns) with Nozzle Holder
– Remote Operation Control Panel
– 1.5” Tank to Pump Line
– Customer Provided Water & Foam Tank
US NAVY – TWIN PUMP SKID, UHP / HV – DIESEL ENGINE DRIVEN
ULTRA-HIGH PRESSURE PUMP
10 GPM @ 1500 PSI Die cast aluminum crank case Stainless steel valves and seats Chrome-Moly crank shaft Oversized bearings Brass in-let manifold Stainless steel discharge manifold Specially formulated Ultra-High Pressure seals
HIGH VOLUME PUMP
Darley 1-1/2 AGE Aluminum alloy casing Aluminum alloy gear case Bronze impeller and wear rings Stainless steel impeller shaft Heat treated alloy steel helical gears
120 GPM @ 145 PSI
50 GPM @ 255 PSI
20 GPM @ 265 PSI
TANKS
350 Gallons – Water
10 Gallons – Foam
Location
1201 Maple Creek Ln.
New London, WI 54961
Open Hours
Mon:7:30am - 4:00pm
Tue: 7:30am - 4:00pm
Wed: 7:30am - 4:00pm
Thur: 7:30am - 4:00pm
Fri: 7:30am - 4:00pm
Sat: Closed
Sun: Closed
Get In Touch
920-779-9913